Flux Specifications

(800) 321-2849

Up

Home
Heavyweight
Middleweight
Lightweight
Flux Specifications

Flux Units Specifications

MODEL H.P. LENGTH Width Height Weight NOTE:

Models marked with asterisk (*) 7MH, 8MH, 9MH, 1OMH & 12MH can be equipped with a primary separator and then become models 7DMH, 8DMH, 9DMH, 10DMH, & 12DMH. Primary separator normally furnished is Model 26-150. However, any of the primary separators listed below may be supplied to meet your requirements.

MOTOR:

Motors furnished are for continuous duty (24 hours per day) at approximately 1750 RPM, 230/460v, 3hp, 60hz. ALL MOTORS ARE TOTALLY ENCLOSED FAN COOLED AND HAVE A FIVE YEAR FACTORY WARRANTY. Single phase, odd voltage and frequency motors can be furnished at an extra charge.

STARTER:

Portable units only are equipped with 25’ 4 wire grounded electric cable and motor starter with overload protection. Cable and/or starters can be furnished on stationary units at a small extra charge.

550-Portable 1.5 43" 22" 47.5" 325#
552-Portable 1.5 56" 22" 47.5" 375#
7MH*-Stationary 1.5 42" 17" 42" 300#
8M-Portable 2 43" 22" 47.5" 350#
882-Stationary 2 56" 22" 47.5" 400#
8MH*-Stationary 2 42" 18" 42" 325#
9M-Portable 3 49" 22" 47.5" 375#
992-Stationary 3 56" 22" 47.5" 425#
9MH-Stationary 3 48" 21.5" 42" 350#
10M-Portable 5 49" 22" 47.5" 400#
1002-Portable 5 56" 22" 47.5" 450#
10MH*-Stationary 5 48" 21.5" 42" 375#
12M-Portable 7.5 49" 22" 53" 450#
1202-Stationary 7.5 56" 22" 53' 500#
12MH-Stationary 7.5 48" 21.5" 47.5' 425#

Top

APPROXIMATE RECOVERY CAPACITY WITH 10FT. VERTICAL RISE
ALL 1.5 H.P. Models HOSE - 10'x1.5" I.D. HOSE - 15'x1.5" I.D. HOSE - 25'x1.5" I.D. HOSE - 50'x1.5" I.D.
40 Lbs. Per Min. 37 Lbs. Per Min. 30 Lbs. Per Min. 21 Lbs. Per Min.
ALL 2 H.P. Models 45 Lbs. Per Min. 40 Lbs. Per Min. 33 Lbs. Per Min. 23 Lbs. Per Min.
ALL 3 H.P. Models HOSE - 10'x2" I.D. HOSE - 15'x2" I.D. HOSE - 25'x2" I.D. HOSE - 50'x2" I.D.
50 Lbs. Per Min. 42 Lbs. Per Min. 33 Lbs. Per Min. 26 Lbs. Per Min.
ALL 5 H.P. Models 90 Lbs. Per Min. 65 Lbs. Per Min. 55 Lbs. Per Min. 44 Lbs. Per Min.
ALL 7.5 H.P. Models 115 Lbs. Per Min. 86 Lbs. Per Min. 72 Lbs. Per Min. 55 Lbs. Per Min.

 

Primary Separators
Model 11-100 11-150 26-100 26-150 The Primary Separator (overhead tank) is included with all machines marked DMH. It is normally furnished in the Model 26-150 size, but other sizes may be selected.

Primary Separators separate out the fines (flux flour) and have a screen tray to remove slag.

The Primary Separator is often needed when continuous (simultaneous pick-up and feed-out) is required. The Primary Separator can be added to portable units or single tank stationary units if and when recovery requirements change. 

Height 27" 35" 44" 50"
Diameter 15" 15" 15" 15"
Weight
(Empty)
35# 37# 42# 45#
Hopper
Copacity
100# 150# 100# 150#
Max Copacity
Hopper & Tank
125# 175# 200# 250#

Top

Have questions or need more information
Up ]Home ] Heavyweight ] Middleweight ] Lightweight ] [ Flux Specifications ]   Site Map


American Vacuum Company
Sales@AmericanVacuum.com
(800) 321-2849
Fax: (847) 674-0214

7301 N Monticello Ave., Skokie, IL   60076
Copyright © 1998 American Vacuum Company. All rights reserved.

Site Developed & Hosted by HitNet, Inc.